Structure installation
MONTIGO installs and unloads sports structures in France and across Europe. Unloading is a separate service, quoted in addition to installation.
See the installation scope
A choice based on your project
There is no universally best label. Start with the site, the views you want from surrounding spaces and the exact court proposed. Compare its drawing, specifications and quote: the same commercial name can describe different post layouts.
The examples below describe manufacturers’ models, not a list of courts sold by MONTIGO. The choice of a supplier and the scope of installation are discussed separately.
Examples tied to named models; their features must not be extended to an entire category.
Scroll horizontally if needed. The three sections below also explain each example.
| Layout | Documented model | Question to check |
|---|---|---|
| Posts throughout | Campa Vibora: posts along the end glass panels. Source | Which posts will appear in the view from your reception area, terrace or spectator space? |
| Open ends | Euronix Euroglassvision EPAD004: no intermediate end posts, retained corner posts. Source | Is the view you want to open up behind the court, at a corner or along one side? |
| No corner posts | Euronix Full Panoramic and Semi Panoramic: names used for a layout without corner posts. Source | Which posts are retained at the ends, corners and sides of the exact model you are considering? |
Explanatory illustrations: same angle, same scale, same lighting. Only the post layout described by each source changes. Names (semi-panoramic, panoramic, full panoramic…) vary from one manufacturer to another: the same name does not always describe the same structure. Installation follows the drawing of the chosen manufacturer.
Example: Campa Vibora. Presented by Campa as a “classic” court. Posts at every joint of the end glass panels, posts at the four corners and posts between the side glass panels.

Example: Euronix Euroglassvision EPAD004. Euronix also describes its “Panoramic” model with corner posts. No intermediate end posts, corner posts retained. Posts between the side glass panels are not specified in the material consulted.

Source: Euronix Euroglassvision EPAD004Enlarge the “Open ends, corner posts retained” view
Example: Euronix Full Panoramic. Euronix describes its “Full Panoramic” this way, and its “Semi Panoramic” too. No corner posts. The sources consulted do not specify the end or side posts, so their positions remain dashed.

Source: Euronix Full PanoramicEnlarge the “No corner posts” view
Open ends, corner posts retained — Euronix Euroglassvision EPAD004
Scroll horizontally

Explanatory illustrations produced for MONTIGO from the 2026 FIP rules and from manufacturers’ descriptions consulted on 3 October 2026. They are neither manufacturer renderings nor construction drawings, and they do not validate strength, compliance or installation. Glass panel layout, entrances, central framework positions, mesh pattern and post section are representative.
01 / Posts throughout
On Campa’s Vibora model, presented as a “classic” court, posts are distributed along the end glass panels. This is a specific example of this layout; it does not define every court sold under that name.
Consider this layout if the posts suit the views planned from neighbouring spaces. Compare drawings and eye-level photographs taken from the positions where spectators will stand.
Ask about your model: Which posts will appear in the view from your reception area, terrace or spectator space?
The exact model’s specification and drawing are still required; the “classic” label alone does not establish suitability for your site.
Check the manufacturer reference02 / Open ends
Euronix’s Euroglassvision EPAD004 has no intermediate posts at the ends, but retains corner posts. Euronix also describes its “Panoramic” model with corner posts: a court sold as panoramic is therefore not necessarily free of all posts around the glass.
Examine this configuration when the view from behind the court matters to your layout. For diagonal views, look at the corners too. Promotional photographs alone do not replace the model’s drawing.
Ask about your model: Is the view you want to open up behind the court, at a corner or along one side?
A clearer view from one position does not establish better playing quality or structural resistance.
Check the manufacturer reference03 / No corner posts
The label does not guarantee a particular post layout. In the range presented by Euronix, two models are described without corner posts: the “Full Panoramic” and the “Semi Panoramic”. Yet the same manufacturer uses the name “Panoramic” for a model that retains its corner posts. A commercial name is therefore not enough to place a model relative to the others.
Do not rank a model by its name alone. Request a complete view of the ends, corners and sides, then compare its structure with the other models proposed for your project.
Ask about your model: Which posts are retained at the ends, corners and sides of the exact model you are considering?
The name alone does not determine glass, resistance, fixings or cost.
Check the manufacturer referenceUse the same brief when comparing the models proposed to you.
Describe the players, spectators and how the facility will be used. Mark the viewing positions that matter on a plan.
Specify indoor or outdoor use, the existing support and access. Padel10 presents CLUB10 for indoor and outdoor use; that statement does not validate every classic model or your particular site. CLUB10 reference
Ask for the model reference, drawings, included equipment and exclusions. Compare written specifications rather than deducing quality or price from the label.
Have the requirements for the support, anchoring, exposure and installation checked for the exact model and site. This guide provides no general slab or fixing specification.
Separate supply, transport, unloading, preparatory works, installation and maintenance in the quotes. A model’s name does not establish a project price.
Send the location, model reference or specifications, the existing site situation and your planned schedule.
MONTIGO installs and unloads sports structures in France and across Europe. Unloading is a separate service, quoted in addition to installation.
See the installation scopeFor earthworks or construction of a slab, MONTIGO can introduce you to companies. You obtain their quotes and contract directly with them. MONTIGO does not provide overall coordination of the works.
Describe your projectLocalised work on slab defects may be considered at an additional cost, with a scope defined case by case.
See a documented classic-court installation: the Wuenheim project. This case does not illustrate the other two layouts.
Consulted on 3 October 2026. These sources describe specific models and may change. They do not establish a commercial relationship or endorsement by MONTIGO.